TYPE 75 BUTANE-PROPANE
The Type 75 Butane-Propane hose was engineered for transferring liquefied propane gas from bulk storage to tank cars or cylinder, or from bobtail trucks, to home storage tanks. This hose has been pin-pricked to permit gas diffusion, and its smooth black cover resists oil, snagging and abrasion.
RESISTANCE
Abrasion
Oil
Weathering
BRANDING: Thermoid Type 75 LPG Hose UL
Gas Hose Issue Number (Quarter) MH12585 350 PSI
Maximum WP Made In USA
COVER COLOR: Black
PRODUCT LITERATURE
View Type 75 Butane-Propane in Thermoid Hose Products Catalog
CONSTRUCTION
TUBE:
Nitrile, ARPM – Class A
COVER:
Nitrile Blend, ARPM – Class A
(1/4″, 3/8″, 1/2″)
Chlorinated Polyethylene, ARPM – Class B
(3/4″ & 1″)
- Abrasion Resistant
- Weather Resistant
- Pin-Pricked to Allow Proper Gas Permeation to Avoid Build Up in the Hose
REINFORCEMENT:
4-Spiral Polyester Yarn providing 350 psi working pressure and 5:1 safety factor
- More Flexible than Braid Reinforced Hose
- Easier to Route Assemblies
- Easier to Coil and Handle
- Less Susceptible to Premature Failure than Braided Hose if Subjected to Torque
TEMPERATURE RANGE:
-40°F to +180°F, -40°C to +82°C
PACKAGING:
Reels
- Length varies by ID 450′ to 700′
- Cut Lengths
- Select Lengths Stocked & Non-stocked, available on
demand
- Select Lengths Stocked & Non-stocked, available on
- Coupled with Pro-Sur™ Brass or Steel Fittings (1″ &
3/4″ only)- Select Lengths Stocked & Non-stocked, available on
demand - Certificate of Testing & US DOT 49 CFR Compliance to
7/1/99 Regulations Included With Each Assembly - Pro-Sur™ One-Piece Fittings Mean No Leak Points
- Select Lengths Stocked & Non-stocked, available on