Select Page

Cyclone® Accessories

Thermoid® offers multiple accessories that can improve the performance and extend the service life of Cyclone® ducting products.

Technical & Overview

Inside Diameter (inches)
  • 5 to 30*
Operating Temp. Range
  • -40°F to +250°F
Lengths
  • Up to 20 ft.
Color
  • Black
*larger diameters available upon request

Features & Benefits

  • Galvanized spring steel wire helix, fully enclosed
  • Single ply neoprene coated nylon fabric
  • Neoprene rubber dip coating inside and outside

Standard Tolerances

Random (Duct Excluding Cuffs)
I.D.
  • + 1/4”
  • – 1/8”
O.A.L.
  • + 1/2″ per foot
  • – 1/8″ per foot
Cuff(s) Soft End(s)
I.D.
  • + 1/4″
  • – 0″
Cuff Lengths
  • +1″
  • – 1/2″

Accessories

Belt Loops
cyclone-belt-loops
  • When repeated loosening and tightening of clamps is expected, belt loops should be permanently attached to the ducting’s soft cuff. The loops are two plies of the same material as the soft cuff.
Hanger Hooks
cyclone-hanger-hooks
  • Permit suspension of ducting from an overhead travel wire. Hooks are made of non-corrosive metal and are permanently attached to ducting
Coupling
cyclone-couplings
  • Flatband spring steel couplings are available.
  • Wire rings are also available and more economical than flat band couplings
Connecting to Blower
  • One end of a single length can be supplied with a soft cuff, which can be easily slipped over and clamped to the fan or blower collar
To Couple
INSERT AND TWIST
cyclone-connecting-couple
  • Flat band or wire ring coupling
To Disconnect
PULL BACK AND LOCK
cyclone-connecting-disconnect
  • Simply reverse the procedure shown above

More