Select Page

Aeroduct® SCEET Ducting

This ducting is highly flexible and can be easily installed around obstructions and sharp bends. It has less air friction loss than similar non-lined ducting and is ideal for use in extremely cold or hot air temperatures, ranging from -80°F to +550°F.

Technical Overview

Inside Diameter (inches)* 2 3 4 5 6
Weight (pounds per foot) .22 .33 .44 .55 .66
Inside Bend Radius (inches) .75 1.0 1.25 1.50 1.75
Length Required for 180º Bend (inches) 10 14 19 24 28
Minimum Burst Pressure (psig) 165 142 125 76 68
Internal Working Pressure (psig) 42 35 31 19 17
Maximum Leakage (ctm/ft. at working pressure) .016 .024 .032 .040 .048
Crush Resistance (pounds per foot) 400 320 290 240 200
Axial Tensile Strength (pounds) 525 680 860 900+ 900+
Retracted Length (inches per foot) 4.5 4.5 4 3.5 3.5
Operating Temperature Range -80ºF to +550ºF

Literature

Thermoid Aviation Ducting and Hose Products – Brochure

Features & Benefits

aeroduct-sceet

A. Support
  • Copper-coated or bronze-plated spring steel-wire bonded between the liner and cover material
B. Liner
  • Fiberglass fabric infused and coated with silicone rubber
C. Cover
  • Fiberglass fabric infused and coated with silicone rubber
D. Cord
  • Fiberglass cord coated with silicone. Standard length – 11 ft.
Applications
  • Ideal for use in conducting extremely cold or hot air at temperatures and for conveying fumes. Not recommended for applications involving liquids or highly abrasive materials, or for negative pressure applications.

More